Skin Tight Latex Tights with Seam and Cuban Heel
Practical fly front with a zipper in the anal area or an anal condom is configurable with this model. The waist of these latex tights is reinforced and double edged. Likewise, the seam in the butt area is double-edged and thus lies nicely between the buttocks, which will make your butt look more shapely and sexy. These pantyhose are made of 0.25 mm material thickness. The waistband and the foot section are reinforced and are made of 0.4 mm thick latex.
Our men’s latex pantyhose are also available with a 12 cm high waistband. You also have the possibility to configure a zipper in the anal area. The zip is equipped with two slides, which makes it possible to use an inflatable latex dildo or an enema.
Color 1: SO - Skin Diamond (not available anymore)
Contrast color 1: Pearlsheen bronze
Experience the awesome wearing comfort of our latex clothing by choosing the chlorinated version. Chlorination has nothing done with the shiny surface of the material.
- Quick dressing without aid
Chlorination makes the surface smooth and silky. The latex slides on your skin and can be put on without any aid like silicone oil or talcum powder. Therefore chlorinated latex is especially suitable for clothes that are very large and laborous to put on - for example latex catsuits. The effect unfortunately disappears if the skin is clammy or if the skin was previously creamed.
- No sticking-together
The latex clothing does neither stick together in the wet state nor in the dry state. This can spare your nerves and faciliate the handling. It is possible to polish the clothes in a tumble dryer using cold air and a soft towel. A basic shininess will appear. Despite this fact, a deep action care with silicone oil is strongly recommended.
- Suitable for allergy sufferer:
Via chlorination latex can be conditioned to be suitable for allergy sufferer or to be more suitable than unchlorinated latex. This can be explained with the deterioration of the allergenic protein that is encased in the latex.
- Increased life period
Untreated latex features so-called double bonds among the carbon backbone of the material. These bonds can be recognized as "docking site" for radicals which can strongly damage latex or decrease the longevity. During chlorination up to 70% of these double bonds are removed and the chemical durability of your rubber is increased.
- Repairs difficult / impossible
The biggest disadvantage: Only thick latex garments can be sometimes repaired in a satisfactory way by the „grinding method“.
- Change of haptics
The material becomes thougher and stiffer. At the beginning the effect can be clearly felt, but over time and by wearing the material it will become softer. Due to the changed haptics the material appears to be of higher thickness than comparable, untreated rubber. A thin catsuit made of 0.25 mm latex will be perceived like a catsuit made of 0.35 mm latex.
The listed size tables should serve only as a reference and can help you determine the correct size of a fitting latex garment. All sizes are in cm! As an information and for calculation purposes for our clients who prefer other measure units: 1 inch = 2,54 cm. Normal sizes of apparel for ladies are based on the presumption that the average height of a woman is 165 to 170 cm. Normal sizes of apparel for gentlemen are based on the presumption that the average height of a man is 175 to 185 cm.