Short sleeve latex catsuit with elegant cut
With this latex catsuit you are perfectly dressed all around, because this all-round talent with elegant optics and high-quality processing can be combined in many ways. This latex catsuit is manufactured in 0.4 mm material thickness. The new cut with Viennese seam gives the latex catsuit this particularly high-quality appearance.
- no attached legs but continuous side seams
- a front rounded stand-up collar which is open at the top by a few cm and is especially comfortable in the neck area
- The décolleté area can be varied more or less freely with the front zipper
- For unrestrained fun this latex catsuit can of course also be equipped with a zipper in the crotch area.
Tip: Complete this latex catsuit and combine it with one of our plate skirts.
Shown latex catsuit:
- Colour: Plum
- Zip colour: Plum
- Material thickness: 0,35 - 0.40 mm
- Crotch area: with zip in crotch area
Fit and dimensions:
The model wears a catsuit in size SMALL and has the following measurements:
- Clothing size: 36 / SMALL
- Body height: 165 cm
- Chest circumference: 89 cm
- Waist: 67 cm
- Buttocks: 92 cm
Experience the awesome wearing comfort of our latex clothing by choosing the chlorinated version. Chlorination has nothing done with the shiny surface of the material.
- Quick dressing without aid
Chlorination makes the surface smooth and silky. The latex slides on your skin and can be put on without any aid like silicone oil or talcum powder. Therefore chlorinated latex is especially suitable for clothes that are very large and laborous to put on - for example latex catsuits. The effect unfortunately disappears if the skin is clammy or if the skin was previously creamed.
- No sticking-together
The latex clothing does neither stick together in the wet state nor in the dry state. This can spare your nerves and faciliate the handling. It is possible to polish the clothes in a tumble dryer using cold air and a soft towel. A basic shininess will appear. Despite this fact, a deep action care with silicone oil is strongly recommended.
- Suitable for allergy sufferer:
Via chlorination latex can be conditioned to be suitable for allergy sufferer or to be more suitable than unchlorinated latex. This can be explained with the deterioration of the allergenic protein that is encased in the latex.
- Increased life period
Untreated latex features so-called double bonds among the carbon backbone of the material. These bonds can be recognized as "docking site" for radicals which can strongly damage latex or decrease the longevity. During chlorination up to 70% of these double bonds are removed and the chemical durability of your rubber is increased.
- Repairs difficult / impossible
The biggest disadvantage: Only thick latex garments can be sometimes repaired in a satisfactory way by the „grinding method“.
- Change of haptics
The material becomes thougher and stiffer. At the beginning the effect can be clearly felt, but over time and by wearing the material it will become softer. Due to the changed haptics the material appears to be of higher thickness than comparable, untreated rubber. A thin catsuit made of 0.25 mm latex will be perceived like a catsuit made of 0.35 mm latex.
The listed size tables should serve only as a reference and can help you determine the correct size of a fitting latex garment. All sizes are in cm! As an information and for calculation purposes for our clients who prefer other measure units: 1 inch = 2,54 cm. Normal sizes of apparel for ladies are based on the presumption that the average height of a woman is 165 to 170 cm. Normal sizes of apparel for gentlemen are based on the presumption that the average height of a man is 175 to 180 cm.