Latex swimsuit with sexy back cutout
This latex swimsuit with slip cut can be combined in many ways and is not only suitable as swimwear. Set shiny accents in combination with everyday clothes. Or seduce your loved one and combine this sexy latex swimsuit with high heels and stockings. For this application, you can also choose the option with zip in the step:
In the water this latex swimsuit with the erotic back neckline cuts a particularly good figure of course. The water rolls off the smooth surface and the sunrays are reflected by the shiny surface.
This sexy swimsuit is made of fine 0.25 mm latex. Optimal wearing comfort and skin-tight fit are guaranteed. Available in many colour combinations.
TIP: For use in water and on the beach we recommend the chlorinated version. Water rolls off faster. Dirt and sand do not stick.
Attached latex swimsuit:
- Color 1: Yellow
- Contrast colour: (border) Yellow
- Zip: shown without crotch zipper
- Material thickness: 0.25 - 0-35 mm
The mannequin wears a latex body in the size SMALL and has the following measurements
- Chest: 87 cm
- Waist: 68 cm
- Buttocks: 89 cm
Experience the awesome wearing comfort of our latex clothing by choosing the chlorinated version. Chlorination has nothing done with the shiny surface of the material.
- Quick dressing without aid
Chlorination makes the surface smooth and silky. The latex slides on your skin and can be put on without any aid like silicone oil or talcum powder. Therefore chlorinated latex is especially suitable for clothes that are very large and laborous to put on - for example latex catsuits. The effect unfortunately disappears if the skin is clammy or if the skin was previously creamed.
- No sticking-together
The latex clothing does neither stick together in the wet state nor in the dry state. This can spare your nerves and faciliate the handling. It is possible to polish the clothes in a tumble dryer using cold air and a soft towel. A basic shininess will appear. Despite this fact, a deep action care with silicone oil is strongly recommended.
- Suitable for allergy sufferer:
Via chlorination latex can be conditioned to be suitable for allergy sufferer or to be more suitable than unchlorinated latex. This can be explained with the deterioration of the allergenic protein that is encased in the latex.
- Increased life period
Untreated latex features so-called double bonds among the carbon backbone of the material. These bonds can be recognized as "docking site" for radicals which can strongly damage latex or decrease the longevity. During chlorination up to 70% of these double bonds are removed and the chemical durability of your rubber is increased.
- Repairs difficult / impossible
The biggest disadvantage: Only thick latex garments can be sometimes repaired in a satisfactory way by the „grinding method“.
- Change of haptics
The material becomes thougher and stiffer. At the beginning the effect can be clearly felt, but over time and by wearing the material it will become softer. Due to the changed haptics the material appears to be of higher thickness than comparable, untreated rubber. A thin catsuit made of 0.25 mm latex will be perceived like a catsuit made of 0.35 mm latex.